Audio Pieces Usually Used The Wrong Way

Shares

Most people would tell us that whenever we recreate sounds or audio, we should just go with the flow and just go along with whatever works. To some extent, this does make sense especially if you have the “ear”, but this piece of advice won’t always give you the best results. Always remember that fiddling with audio pieces isn’t that simple. There are various techniques that are involved in the process. Let’s take a look at how audio pieces are commonly misused and how they should be corrected.

If it sounds fine, don’t touch it

Let’s face it, no recording will be 100% perfect. After you finish a recording session, slips are bound to be present in the vocals, guitar riffs, or even the effects. You won’t have a perfect end result right away! Now, the mistake of most audio specialists is that they avoid fixing these small slips. Granted that no one can hear those little mistakes in audio, it’s part of your work to make sure that the end result is polished and refined. It is important that you continuously improve your creation until it reaches near perfection. With that, you should always strive for perfection when it comes to creating the final audio creation.

If the craftsman is already good, we don’t need to edit so much

Once again, we have another piece of advice that is widely misused. Most people believe that the end product is dependent on the craftsman or the musician and not the audio mixing. Although this is quite true, we cannot deny the fact that we need audio editing to polish the sound. Sure, musicians or craftsmen may have the skills, but they still need the equipment and the tools. This is where the audio solutions specialists would come in.

The audio specialists would provide the mic, the computer, and the other necessary tools that are needed for recording high quality sound. Ask any musician and they will tell you how important having a good recording mic is. The recording microphone is the tool that is able to catch the musician’s sound without getting the noise that comes from the environment. If the mic does get some noise from the environment, it is the audio editing software’s job to clean it up. The software can also enhance parts of the audio file by reshaping the bass, increasing the overall volume, making the vocals louder etc. Musicians or sound recorders will need all of these tools to create the final output.

If you have an ear for music, there are no rules

Those who have an ear for music are quite lucky as this talent makes audio mixing easier. However, this does not mean that there are no basic principles and techniques that should be observed. Most people who are born with musical talent would probably say that they don’t need to learn the techniques of using audio pieces. They can just play around and experiment until they get the right sound. The principles of audio mixing were made for a reason. They were created because they were tried, tested, and trusted. So, even if you do have a knack for sounds and you know what sounds good, you will still not have a near-perfect end result if you don’t know the basic principles. If you do have the talent and would want to specialize in audio editing, then learn the principles from an actual school or mentor. Don’t just experiment and think that something good will pop out automatically. You can experiment once you get the basic principles covered. Always remember that talent can only get you far enough, but hard work will get you to your destination.

Sound editing is not something that should be taken lightly. Audio mixing is extremely important with regard to recording because it gives people the best quality outputs. It is because of this that audio specialists must always strive to perfect their craft. Even if the final product may seem good enough, there is always something that you can improve on. Don’t be contented with whatever sounds “good”.

Leave a Comment:

Popular posts